Panasonic PT-DS20K2E SXGA+ Installation Projector
S$61,173.00
In stock
SKU
PT-DS20K2E (W/O LENSE)
100% Authentic Product
Guaranteed Authentic Product
Huge Selection
Projectors and related products
Safe Payment
Safe Shopping Guarantee
Support 24/7
Always Feedback to Customer 24/7
PANASONIC PT-DS20K2E SXGA+ 20,000 LUMENS INSTALLATION PROJECTOR
Power Supply | 200-240 V AC, 50/60 Hz | ||
Power Consumption | 2,060 W (0.3 W with STANDBY MODE set to ECO,*1 4 W with STANDBY MODE set to NORMAL.) |
||
DLP™ chip | Panel Size | 24.1 mm (0.95 in) diagonal (4:3 aspect ratio) |
|
Display Method | DLP™ chip x 3, DLP™ projection system | ||
Pixels | 1,470,000 (1,400 x 1,050) x 3, total of 4,410,000 pixels | ||
Refresh Rate | 120 Hz*2 | ||
Lens | Optional powered zoom and fixed-focus lenses | ||
Lamp | Normal | UHM lamp x 4 (432 W), replacement cycle of up to 3,000 hours*3 | |
Portrait | UHM lamp x 4 (432 W), replacement cycle of up to 700 hours | ||
Screen Size (diagonal) | 1.78-25.4 m (70-1,000 in), 1.78-7.62 m (70-300 in) with the ET-D75LE50, 3.05-15.24 m (120-600 in) with the ET-D75LE90, 1.78-15.24 m (70-600 in) with the ET-D75LE8, 4:3 aspect ratio |
||
Brightness*4 | 20,000 lm (four-lamp) | ||
Corner-to-Corner Uniformity | 90% | ||
Contrast*4 | 10,000:1 (full on/off, with dynamic iris set to “3” ) | ||
Resolution | 1,400 x 1,050 pixels*5 | ||
Scanning Frequency | SDI | SD-SDI | SMPTE ST 259 compliant, [YCBCR 4:2:2 10-bit] 480i, 576i |
HD-SDI | SMPTE ST 292 compliant, [YPBPR 4:2:2 10-bit] 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p |
||
3G-SDI | SMPTE ST 424 compliant, [YPBPR 4:2:2 10-bit] 1080/50p, 1080/60p, [RGB 4:4:4 12-bit /10-bit] 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p |
||
Dual-link HD-SDI | SMPTE ST 372 compliant, [RGB 4:4:4 12-bit /10-bit] 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p, [X´Y´Z´ 4:4:4 12-bit] 2048 x 1080/24p, 2048 x 1080/24sF |
||
Dual-link 3G-SDI |
SMPTE ST 425 compliant, [YPBPR 4:4:4 12-bit / 10-bit] 1080/60p, 1080/50p, 2048 x 1080/60p, 2048 x 1080/50p, 2048 x 1080/48p [RGB 4:4:4 12-bit/10-bit] 1080/60p, 1080/50p, 2048 x 1080/60p, 2048 x 1080/50p, 2048 x 1080/48p |
||
HDMI/DVI-D/ DIGITAL LINK |
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA (640 x 480)-WUXGA*6 (1920 x 1200), compatible with non-interlaced signals only, dot clock: 25-162 MHz |
||
DVI-D/HDMI simultaneous input |
1920 x 1200p, 1920 x 1080p, 1400 x 1050p, 1366 x 768p, 120 Hz/100 Hz | ||
RGB | fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 13.5-162 MHz | ||
YPBPR (YCBCR) | fH: 31.50 kHz, fV: 60 Hz [480p (525p)] fH: 31.25 kHz, fV: 50 Hz [576p (625p)] fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p] fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i] fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p] fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF] fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p] |
||
Video/YC | fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] | ||
Optical Axis Shift*7 | Vertical | ±50 % (±40 % with the ET-D75LE6, +71 % (fixed) with the ET-D75LE90) (powered) |
|
Horizontal | ±30 % (±20 % with the ET-D75LE6, ±0 % (non-movable) with the ET-D75LE90) (powered) |
||
Keystone Correction Range | Vertical: ±40°, horizontal: ±15° | ||
Keystone Correction Range with Optional Upgrade Kit | Vertical: ±45°, horizontal: ±40° | ||
Installation | Ceiling/floor, front /rear, portrait*8 | ||
Terminals | SDI IN | BNC x 2 (3G/HD/SD-SDI) | |
DVI-D IN | DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) | ||
HDMI IN | HDMI 19-pin x 1 (Deep Color, compatible with HDCP) | ||
RGB 1 IN | BNC x 5 (RGB/YPBPR/YCBCR/VIDEO/YC x 1) | ||
RGB 2 IN | D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1) | ||
3D SYNC IN/OUT | BNC x 1 (3D timing signal) | ||
3D SYNC OUT | BNC x 1 (3D timing signal) | ||
SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | ||
SERIAL OUT | D-sub 9-pin (male) x 1 for link control | ||
REMOTE 1 IN | M3 x 1 for wired remote control | ||
REMOTE 1 OUT | M3 x 1 for link control (for wired remote control) | ||
REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) | ||
LAN/DIGITAL LINK | RJ-45 x 1 (for network, DIGITAL LINK connection, 100Base-TX, compatible with Art-Net, PJLink™ (class 1), Deep Color, HDCP) | ||
Cabinet Materials | Moulded plastic | ||
Dimensions (W x H x D) | 620 x 255 x 730 mm (24-13/32 x 10-1/32 x 28-3/4 in) (optional lens, legs and lens cover not included) |
||
Weight*9 | Approx. 43 kg (94.8 lbs) (optional lens not included) | ||
Operation Noise*4 | 46dB | ||
Operating Environment | Operating temperature: 0-45°C (32-113°F)*10, operating humidity: 10-80 % (no condensation) |
||
Applicable Software | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit and ET-CUK10*11 Auto Screen Adjustment Kit) |
||
Supplied Accessories | Power cord with secure lock, wireless/wired remote control unit, batteries (R6/AA type x 2), software CD-ROM (Logo Transfer Software, Multi Monitoring & Control Software) (x 1) | ||
NOTE | *1 When Standby Mode is set to Eco, network functions such as power on over LAN will not operate. Additionally, only certain commands can be received for external control using the serial terminal. *2 Refresh rate varies depending on scanning frequency. *3 This value (maximum, 50 % brightness) is calculated by continuously turning the lamp on for 2 hours and off for 0.25 hours. The lamp replacement cycle will decrease if the lamp is turned on/off more frequently, or if it is left on for longer intervals. *4 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *5 Input signals that exceed the native resolution will be converted to the native resolution. *6 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking). *7 Optical axis shift is not supported on the ET-D75LE50. *8 Requires optional lamp units for portrait mode. *9 Average value. May differ depending on the actual unit. *10 Operating temperature range is 0–40 °C (32–104 °F) when Fan Control is set to High Altitude Mode for altitudes 1,400–2,700 m (4,593–8,858 ft) above sea level. With ET-LAD520P/LAD520PF mounted for Portrait Mode, operating temperature range is 0–40 °C (32–104 °F). *11 Available worldwide except in the United States. |
MODEL | PT-DS20K2E |
---|---|
TECHNOLOGY | DLP |
BRIGHTNESS | 20000 LUMENS |
RESOLUTION | SXGA+ (1400 x 1050) |
WEIGHT | 43 kg |
LAMP LIFE | 20000 HOURS |
WARRANTY | 3 YEARS |
Write Your Own Review