Panasonic PT-RCQ80 Full Laser Installation Projector
S$22,353.00
In stock
SKU
Panasonic PT-RCQ80
100% Authentic Product
Guaranteed Authentic Product
Huge Selection
Projectors and related products
Safe Payment
Safe Shopping Guarantee
Support 24/7
Always Feedback to Customer 24/7
| Projector type | 1-Chip DLP™ projector |
| DLP™ chip | Panel size (mm) | 17.0 mm (0.67 in) diagonal, 16:10 aspect ratio |
| DLP™ chip | Panel size (inch) | 17.0 mm (0.67 in) diagonal, 16:10 aspect ratio |
| DLP™ chip | Display method | DLP™ chip x 1, DLP™ projection system |
| DLP™ chip | Number of Pixels | 2,304,000 (1920 × 1200) pixels, 4,608,000 (2,304,000 x 2) pixels when 4K Smooth Pixel Drive set to ON |
| Light source | Laser diodes |
| Light output*1 | 8,000 lm |
| Time until light output declines to 50 %*2 | 20,000 hours (NORMAL) / 24,000 hours (ECO) |
| Resolution | 4K-equivalent (4K Smooth Pixel Drive: ON) |
| Screen size [diagonal] (mm) | 1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with ET-DLE055, 2.54–8.89 m (100–350 in) with ET-DLE035, 16:10 aspect ratio |
| Screen size [diagonal] (inch) | 1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with ET-DLE055, 2.54–8.89 m (100–350 in) with ET-DLE035, 16:10 aspect ratio |
| LENS | Optional lenses |
| Lens shift | Vertical (from center of screen) | +50 %, -16 % (+40 %, -16 % with ET-DLE060) (powered) |
| Lens shift | Horizontal (from center of screen) | +30 %, -10 % (+19 %, -10 % with ET-DLE060 / +28 %, -10 % with ET-DLE105/ET-DLE085) (powered) |
| Keystone correction range | Vertical: ±40° (±16° with ET-DLE060, ±22° with ET-DLE105/ET-DLE085/DLE055, +5° with ET-DLE035),Horizontal: ±15° (±10° with ET-DLE060) (cannot be operated with ET-DLE035) |
| Keystone correction range with optional ET-UK20 Upgrade Kit | Vertical: ±45° (±16° with ET-DLE060, ±40° with ET-DLE150/DLE250/ET-DLE170, ±22° with ET-DLE105/ET-DLE085/DLE055),Horizontal: ±40° (±10° with ET-DLE060, ±15° with ET-DLE105/ET-DLE085/DLE055),When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55°. |
| Installation | Ceiling/floor, front/rear, free 360-degree installation |
| Terminals | SDI IN | BNC x 1: 3G/HD-SDI input |
| Terminals | HDMI IN | HDMI 19-pin x 1 (Deep Color, compatible with HDCP 2.2) |
| Terminals | DVI-D IN | DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) |
| Terminals | MULTI PROJECTOR SYNC IN | BNC x 1 |
| Terminals | MULTI PROJECTOR SYNC OUT | BNC x 1 |
| Terminals | SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| Terminals | SERIAL OUT | D-sub 9-pin (male) x 1 for link control |
| Terminals | REMOTE 1 OUT | M3 x 1 for link control (for wired remote control) |
| Terminals | REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) |
| Terminals | LAN | RJ-45 x 1 for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (Class 2), Art-Net |
| Terminals | DIGITAL LINK/LAN | RJ-45 x 1 for network, DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX, compatible with Art-Net, PJLink™ (Class 2), Deep Color, HDCP 2.2 |
| Terminals | Expansion Slot | SLOT for interface boards, SLOT NX compatible |
| Power supply | AC 100-240 V, 50/60 Hz |
| Power consumption | TBD |
| Cabinet materials | Molded plastic |
| Operation noise*1 | TBD |
| Dimensions (W x H x D) (mm) | TBD |
| Dimensions (W x H x D) (inch) | TBD |
| Weight*5 | 23.8 kg (52.5 lbs) |
| Operating environment | Operating temperature: 0-45 °C (32-113 °F)*6, operating humidity: 10-80 % (no condensation) |
| Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™ |
| Note | *1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *2 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcastcontents, NORMAL Mode, Dynamic Contrast [ON], under conditions with 35 °C (95 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output declines to 50 % varies depending on environment. *3 Lens shift is not supported on theET-DLE055, and the optical axis is fixed with the ET-DLE035. *4 With legs at shortest position. *5 Average value. May differ depending on the actual unit. *6 When using the projector at an altitude lower than 2,700 m (8,858 ft) above sea level, and the operating environment temperaturebecomes 30 °C (86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2,700 m (8,858 ft) and 4,200 m (13,780 ft), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may bereduced to protect the projector. |
| Terminals | REMOTE 1 IN | M3 x 1 for wired remote control |
| Contrast Ratio*1 | 10,000:1 (Full On/Full Off, Dynamic Contrast Mode: ON) |
| Terminals | USB | USB Connector (Type A) x 1 for Cloning/Wireless Module (output 5 V/500 mA) |
| Center-to-corner zone ratio*1 | 90 % |
| MODEL | PT-RCQ80 |
|---|---|
| TECHNOLOGY | DLP |
| BRIGHTNESS | 8300 LUMENS |
| WEIGHT | 24 kg |
| LAMP LIFE | 20000 HOURS |
| WARRANTY | 3 YEARS |
Write Your Own Review